Fire Alarm Control Panel PK-CP002
Fire alarm indication
At the top area of the panel is the main display. When enter to fire alarm, the red FIRE LED lights. If the outputs:
Sounder/ Fire protection/ Fire routing did not disabled or have any faults, red ACTIVE LED light.
Zone Fire Alarm Control Panel Specification
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input
- Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC
battery will be cut off automatically until the mains power is on.
- It has an optional GSM module for fire alarm by SMS
Technical Specifications
| AC INPUT | 220VAC 50Hz | +10% |
| -15% | ||
| DC OUTPUT | 24VDC typical | |
| Batteries current | 1.85A maximum, current limited | |
| Auxiliary output | 24VDC ± 10%, 100 mA max, current limited, monitored |
|
| Batteries | 2*12V/ 2.3Ah sealed lead acid gel, self-regulated |
|
There are no reviews yet.